Model No.: NO.7007AC
Contact Angular: 25°
Inner Diameter: 35mm
Outer Diameter: 62mm
Basic Dynamic Load Rating CR: 14.19KN
Basic Static Load Rating COR: 10.70KN
Angular Contact Ball Bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race.
The connection line between the steel ball of NO.7007AC angular contact Ball Bearing and the outer ring contact point is at an angle to the radial direction. Angular contact ball bearings are mainly subjected to larger single direction axial loads, the larger the contact angle, the greater the load capacity. Angular contact ball bearing is non-separation design, inside and outside the circle on both sides of the shoulder height varies. single row angular contact ball bearings are mianly used in machine tool spindle, high frequency motor, gas turbine, centrifugal separator, front wheel of small car, Differential gear shaft, booster pump, drilling platform, food Machinery, electrical Equipment, etc. Double Row Angular Contact Ball bearings are mianly used in oil pump, blower, various types of transmissions, fuel jet pump, planetary reducer, fine chemical machinery , etc. Zhejiang Huanyu Bearing Co.Ltd is a professional angular contact ball bearing manufacture, we supply angular contact ball bearing in many designs, variants and sizes with high quality standard. we also provide good service and fast deliver.
Product Categories : Angular Contact Ball Bearing